2P1608LL NTN Thrust Roller Bearings

Z:27.3 mm; Weight:1.13 kg; C:19.5 kN; T max.:100 °C; N:12mm; L:108 mm; Designation of housing:F206N-; S:9 mm; d1:44.1 mm; C0:11.2 kN;

L1:260 mm; Recommended tightening torque for set screw:8 Nm; A5:19.2 mm; SW:3.97 mm; Designation of bearing:ES209-26G2T04; T min.:-40 °C; T max.:100 °C; s1:33.4 mm; L:320 mm; G:R1/8";

G:R1/8"; N:18mm; e:24 mm; A:41.6 mm; Weight:2.42 kg; Designation of open end cover:SCOE210-50; s1:42.9 mm; L:116 mm; J:157 mm; A2:62.1 mm;

L1:260 mm; Recommended tightening torque for set screw:8 Nm; A5:19.2 mm; SW:3.97 mm; Designation of bearing:ES209-26G2T04; T min.:-40 °C; T max.:100 °C; s1:33.4 mm; L:320 mm; G:R1/8";

B:61.9 mm; e:19 mm; C:81.6 kN; A1:22 mm; G:M6x1; L:195 mm; Designation of housing:FS312-; A2:67.4 mm; A:56 mm; Recommended tightening torque for set screw:22 Nm;

B:61.9 mm; e:19 mm; C:81.6 kN; A1:22 mm; G:M6x1; L:195 mm; Designation of housing:FS312-; A2:67.4 mm; A:56 mm; Recommended tightening torque for set screw:22 Nm;

Z:27.3 mm; Weight:1.13 kg; C:19.5 kN; T max.:100 °C; N:12mm; L:108 mm; Designation of housing:F206N-; S:9 mm; d1:44.1 mm; C0:11.2 kN;

Z:27.3 mm; Weight:1.13 kg; C:19.5 kN; T max.:100 °C; N:12mm; L:108 mm; Designation of housing:F206N-; S:9 mm; d1:44.1 mm; C0:11.2 kN;

Z:27.3 mm; Weight:1.13 kg; C:19.5 kN; T max.:100 °C; N:12mm; L:108 mm; Designation of housing:F206N-; S:9 mm; d1:44.1 mm; C0:11.2 kN;

Z:27.3 mm; Weight:1.13 kg; C:19.5 kN; T max.:100 °C; N:12mm; L:108 mm; Designation of housing:F206N-; S:9 mm; d1:44.1 mm; C0:11.2 kN;

B:61.9 mm; e:19 mm; C:81.6 kN; A1:22 mm; G:M6x1; L:195 mm; Designation of housing:FS312-; A2:67.4 mm; A:56 mm; Recommended tightening torque for set screw:22 Nm;

J:99 mm; N:13.5mm; s1:17.05 mm; Recommended tightening torque for set screw:3.9 Nm; e:16 mm; C0:8 kN; H:125 mm; Designation of open end cover:SCO205-25; Dz:60 mm; Designation of bearing:SUC205;

Characteristic cage frequency, FTF:0.4 Hz; b:15.6 mm; Mass:17.41 kg; B:80 mm; d2:138.9 mm; Radial clearance class:C4 Special; Brand:SNR; D:240 mm; Characteristic outer ring frequency, BPF0:5.6 Hz; Nref:2,300 rpm;

J:99 mm; N:13.5mm; s1:17.05 mm; Recommended tightening torque for set screw:3.9 Nm; e:16 mm; C0:8 kN; H:125 mm; Designation of open end cover:SCO205-25; Dz:60 mm; Designation of bearing:SUC205;

a max:4.06 mm; D3 max:115.21 mm; rs min:2 mm; Dynamic load, C:70.7 kN; rNs min:0.5 mm; Characteristic cage frequency, FTF:0.38 Hz; B:29 mm; a min:3.86 mm; Da max:111 mm; D1:102.3 mm;