ZKLF30100-2Z INA Thrust Ball Bearings

Mass:0.0037 kg; Brand:NTN; ras max:0.3 mm; da min:8 mm; t:1 mm; Precision class:P0; B:10 mm; Lubrication hole on inner ring:Oui/Yes; d:6 mm; rs min:0.3 mm;

J:116 mm; e:13 mm; d:28.58 mm; H:117 mm; s1:15 mm; A1:12 mm; C:19.5 kN; T min.:-20 °C; C0:11.2 kN; A:24 mm;

Expansion Type:Non-Expansion; End Cap Groove:Yes; Housing Type:2 Bolt Flange; Self Aligning:Self Centering; Base to Center Height:Not Applicable; Bearing Insert Material:Nickel-Coated Steel; Retainer Material:Polymer; Anti-Rotation Pin:Yes; Bearing Family:Setscrew Ball Bearin; Housing Coating:No Coating;

H2:83 mm; T max.:100 °C; T min.:-40 °C; B:38.1 mm; Designation of housing:PG206N-; d:30 mm; C0:11.2 kN; L:85 mm; Z:52.3 mm; A:48 mm;

H2:83 mm; T max.:100 °C; T min.:-40 °C; B:38.1 mm; Designation of housing:PG206N-; d:30 mm; C0:11.2 kN; L:85 mm; Z:52.3 mm; A:48 mm;

s1:42.9 mm; SW:4 mm; Recommended tightening torque for set screw:11.5 Nm; A1:16 mm; H1:102 mm; H2:83 mm; N1:19 mm; N:29mm; H:117 mm; B1:62.7 mm;

Expansion Type:Non-Expansion; Flinger Material:Steel; Ball Bearing Housing Series:215 Series; Bearing Outer Ring Material:Steel; Ball Material:Steel; End Cap Groove:Yes; Bearing Family:Setscrew Ball Bearin; Retainer Material:Nylon; Housing Type:4 Bolt Flange; Anti-Rotation Pin:Yes;

L3:51 mm; Recommended tightening torque for set screw:3.7 Nm; L2:10 mm; SW:3.18 mm; A:32 mm; L:94 mm; N:19mm; H2:51 mm; H1:76 mm; d:19.05 mm;

Mass:0.0037 kg; Brand:NTN; ras max:0.3 mm; da min:8 mm; t:1 mm; Precision class:P0; B:10 mm; Lubrication hole on inner ring:Oui/Yes; d:6 mm; rs min:0.3 mm;

Bearing Duty:Medium Duty; UPC:782475970117; Bearing Locking Device:Setscrew; Bearing Insert Material:Steel; Ball Bearing Housing Series:216 Series; Anti-Rotation Pin:Yes; Expansion Type:Non-Expansion; Ball Material:Steel; Bearing Family:Setscrew Ball Bearin; Seal Type:Shield;

J:116 mm; e:13 mm; d:28.58 mm; H:117 mm; s1:15 mm; A1:12 mm; C:19.5 kN; T min.:-20 °C; C0:11.2 kN; A:24 mm;

B2:22.3 mm; D:110 mm; B:33.4 mm; Weight:1.2 kg; Recommended tightening torque for set screw:22 Nm; S:12 mm; C:24 mm; m:8 mm; d:60 mm; SW:5 mm;

J:170 mm; e:16 mm; T min.:-40 °C; H3:145; S:25.4 mm; A1:15 mm; C:57.2 kN; G:M6x1; d:65 mm; N:19mm;

Mass:0.0037 kg; Brand:NTN; ras max:0.3 mm; da min:8 mm; t:1 mm; Precision class:P0; B:10 mm; Lubrication hole on inner ring:Oui/Yes; d:6 mm; rs min:0.3 mm;

Harmonized Tariff Code:8482.10.50.68; Category:Single Row Ball Bear; Internal Clearance:C3-Loose; Characteristic cage frequency, FTF:0.36 Hz; Mass:0.08 kg; Static load, C0:5.45 kN; Inch - Metric:Metric; Product Group:B00308; Inner Race Width:0 Inch | 0 Millimete; Maximum Capacity / Filling Slot:No;