51114 NSK Thrust Ball Bearings

s1:42.9 mm; SW:4 mm; Recommended tightening torque for set screw:11.5 Nm; A1:16 mm; H1:102 mm; H2:83 mm; N1:19 mm; N:29mm; H:117 mm; B1:62.7 mm;

da min:12 mm; Fatigue limit load, Cu:0.13 kN; Nlim:21,000 rpm; D1:22.5 mm; da max:13.9 mm; d:10 mm; Dynamic load, C:4.45 kN; rs min:0.3 mm; f0:12.4; Max operating temperature, Tmax:120 °C;

Bearing Duty:Medium Duty; UPC:782475970117; Bearing Locking Device:Setscrew; Bearing Insert Material:Steel; Ball Bearing Housing Series:216 Series; Anti-Rotation Pin:Yes; Expansion Type:Non-Expansion; Ball Material:Steel; Bearing Family:Setscrew Ball Bearin; Seal Type:Shield;

Mass:0.0037 kg; Brand:NTN; ras max:0.3 mm; da min:8 mm; t:1 mm; Precision class:P0; B:10 mm; Lubrication hole on inner ring:Oui/Yes; d:6 mm; rs min:0.3 mm;

B2:22.3 mm; D:110 mm; B:33.4 mm; Weight:1.2 kg; Recommended tightening torque for set screw:22 Nm; S:12 mm; C:24 mm; m:8 mm; d:60 mm; SW:5 mm;

s1:42.9 mm; SW:4 mm; Recommended tightening torque for set screw:11.5 Nm; A1:16 mm; H1:102 mm; H2:83 mm; N1:19 mm; N:29mm; H:117 mm; B1:62.7 mm;

B:126 mm; S:51 mm; Recommended tightening torque for set screw:75 Nm; T max.:200 °C; e:65 mm; A1:48 mm; C:228 kN; J:430 mm; Designation of bearing:UC324G2T20; G:M10x1;

Expansion Type:Non-Expansion; End Cap Groove:Yes; Housing Type:2 Bolt Flange; Self Aligning:Self Centering; Base to Center Height:Not Applicable; Bearing Insert Material:Nickel-Coated Steel; Retainer Material:Polymer; Anti-Rotation Pin:Yes; Bearing Family:Setscrew Ball Bearin; Housing Coating:No Coating;

da min:12 mm; Fatigue limit load, Cu:0.13 kN; Nlim:21,000 rpm; D1:22.5 mm; da max:13.9 mm; d:10 mm; Dynamic load, C:4.45 kN; rs min:0.3 mm; f0:12.4; Max operating temperature, Tmax:120 °C;

B2:22.3 mm; D:110 mm; B:33.4 mm; Weight:1.2 kg; Recommended tightening torque for set screw:22 Nm; S:12 mm; C:24 mm; m:8 mm; d:60 mm; SW:5 mm;

s1:42.9 mm; SW:4 mm; Recommended tightening torque for set screw:11.5 Nm; A1:16 mm; H1:102 mm; H2:83 mm; N1:19 mm; N:29mm; H:117 mm; B1:62.7 mm;

H2:83 mm; T max.:100 °C; T min.:-40 °C; B:38.1 mm; Designation of housing:PG206N-; d:30 mm; C0:11.2 kN; L:85 mm; Z:52.3 mm; A:48 mm;

H:33.3 mm; s1:15.5 mm; Z:16 mm; d:15 mm; Recommended tightening torque for set screw:3.9 Nm; J:95 mm; H1:15 mm; Designation of bearing:SUC202; L:126 mm; Designation of housing:SP204N-;

da min:12 mm; Fatigue limit load, Cu:0.13 kN; Nlim:21,000 rpm; D1:22.5 mm; da max:13.9 mm; d:10 mm; Dynamic load, C:4.45 kN; rs min:0.3 mm; f0:12.4; Max operating temperature, Tmax:120 °C;

Expansion Type:Non-Expansion; Flinger Material:Steel; Ball Bearing Housing Series:215 Series; Bearing Outer Ring Material:Steel; Ball Material:Steel; End Cap Groove:Yes; Bearing Family:Setscrew Ball Bearin; Retainer Material:Nylon; Housing Type:4 Bolt Flange; Anti-Rotation Pin:Yes;